Encoding Procedures

There are two methods for shared memory allocation and handling in oneVPL: external and internal.

External Memory

The following pseudo code shows the encoding procedure with external memory (legacy mode):

 1MFXVideoENCODE_QueryIOSurf(session, &init_param, &request);
 2allocate_pool_of_frame_surfaces(request.NumFrameSuggested);
 3MFXVideoENCODE_Init(session, &init_param);
 4sts=MFX_ERR_MORE_DATA;
 5for (;;) {
 6   if (sts==MFX_ERR_MORE_DATA && !end_of_stream()) {
 7      find_unlocked_surface_from_the_pool(&surface);
 8      fill_content_for_encoding(surface);
 9   }
10   surface2=end_of_stream()?NULL:surface;
11   sts=MFXVideoENCODE_EncodeFrameAsync(session,NULL,surface2,bits,&syncp);
12   if (end_of_stream() && sts==MFX_ERR_MORE_DATA) break;
13   // Skipped other error handling
14   if (sts==MFX_ERR_NONE) {
15      MFXVideoCORE_SyncOperation(session, syncp, INFINITE);
16      do_something_with_encoded_bits(bits);
17   }
18}
19MFXVideoENCODE_Close(session);
20free_pool_of_frame_surfaces();

Note the following key points about the example:

Note

It is the application’s responsibility to fill pixels outside of the crop window when it is smaller than the frame to be encoded, especially in cases when crops are not aligned to minimum coding block size (16 for AVC and 8 for HEVC and VP9).

Internal Memory

The following pseudo code shows the encoding procedure with internal memory:

 1MFXVideoENCODE_Init(session, &init_param);
 2sts=MFX_ERR_MORE_DATA;
 3for (;;) {
 4   if (sts==MFX_ERR_MORE_DATA && !end_of_stream()) {
 5      MFXMemory_GetSurfaceForEncode(session,&surface);
 6      fill_content_for_encoding(surface);
 7   }
 8   surface2=end_of_stream()?NULL:surface;
 9   sts=MFXVideoENCODE_EncodeFrameAsync(session,NULL,surface2,bits,&syncp);
10   if (surface2) surface->FrameInterface->Release(surface2);
11   if (end_of_stream() && sts==MFX_ERR_MORE_DATA) break;
12   // Skipped other error handling
13   if (sts==MFX_ERR_NONE) {
14      MFXVideoCORE_SyncOperation(session, syncp, INFINITE);
15      do_something_with_encoded_bits(bits);
16   }
17}
18MFXVideoENCODE_Close(session);

There are several key differences in this example, compared to external memory (legacy mode):

Configuration Change

The application changes configuration during encoding by calling the MFXVideoENCODE_Reset() function. Depending on the difference in configuration parameters before and after the change, the oneVPL encoder will either continue the current sequence or start a new one. If the encoder starts a new sequence, it completely resets internal state and begins a new sequence with the IDR frame.

The application controls encoder behavior during parameter change by attaching the mfxExtEncoderResetOption structure to the mfxVideoParam structure during reset. By using this structure, the application instructs the encoder to start or not start a new sequence after reset. In some cases, the request to continue the current sequence cannot be satisfied and the encoder will fail during reset. To avoid this scenario, the application may query the reset outcome before the actual reset by calling the MFXVideoENCODE_Query() function with the mfxExtEncoderResetOption attached to the mfxVideoParam structure.

The application uses the following procedure to change encoding configurations:

  1. The application retrieves any cached frames in the oneVPL encoder by calling the MFXVideoENCODE_EncodeFrameAsync() function with a NULL input frame pointer until the function returns mfxStatus::MFX_ERR_MORE_DATA.

  2. The application calls the MFXVideoENCODE_Reset() function with the new configuration:

    • If the function successfully sets the configuration, the application can continue encoding as usual.

    • If the new configuration requires a new memory allocation, the function returns mfxStatus::MFX_ERR_INCOMPATIBLE_VIDEO_PARAM. The application must close the oneVPL encoder and reinitialize the encoding procedure with the new configuration.

External Bitrate Control

The application can make the encoder use the external Bitrate Control (BRC) instead of the native bitrate control. To make the encoder use the external BRC, the application should attach the mfxExtCodingOption2 structure with ExtBRC = MFX_CODINGOPTION_ON and the mfxExtBRC callback structure to the mfxVideoParam structure during encoder initialization. The Init, Reset, and Close callbacks will be invoked inside their corresponding functions: MFXVideoENCODE_Init(), MFXVideoENCODE_Reset(), and MFXVideoENCODE_Close(). The following figure shows asynchronous encoding flow with external BRC (using GetFrameCtrl and Update):

Asynchronous encoding flow with external BRC

Asynchronous encoding flow with external BRC

Note

IntAsyncDepth is the oneVPL max internal asynchronous encoding queue size. It is always less than or equal to mfxVideoParam::AsyncDepth.

The following pseudo code shows use of the external BRC:

  1   #include "mfxvideo.h"
  2   #include "mfxbrc.h"
  3
  4   typedef struct {
  5      mfxU32 EncodedOrder;
  6      mfxI32 QP;
  7      mfxU32 MaxSize;
  8      mfxU32 MinSize;
  9      mfxU16 Status;
 10      mfxU64 StartTime;
 11      // ... skipped
 12   } MyBrcFrame;
 13
 14   typedef struct {
 15      MyBrcFrame* frame_queue;
 16      mfxU32 frame_queue_size;
 17      mfxU32 frame_queue_max_size;
 18      mfxI32 max_qp[3]; //I,P,B
 19      mfxI32 min_qp[3]; //I,P,B
 20      // ... skipped
 21   } MyBrcContext;
 22
 23   void* GetExtBuffer(mfxExtBuffer** ExtParam, mfxU16 NumExtParam, mfxU32 bufferID)
 24   {
 25       int i=0;
 26       for(i = 0; i < NumExtParam; i++) {
 27           if(ExtParam[i]->BufferId == bufferID) return ExtParam[i];
 28       }
 29       return NULL;
 30   }
 31
 32   static int IsParametersSupported(mfxVideoParam *par)
 33   {
 34       UNUSED_PARAM(par);
 35       // do some checks
 36       return 1;
 37   }
 38
 39   static int IsResetPossible(MyBrcContext* ctx, mfxVideoParam *par)
 40   {
 41       UNUSED_PARAM(ctx);
 42       UNUSED_PARAM(par);
 43       // do some checks
 44       return 1;
 45   }
 46
 47   static MyBrcFrame* GetFrame(MyBrcFrame *frame_queue, mfxU32 frame_queue_size, mfxU32 EncodedOrder)
 48   {
 49       UNUSED_PARAM(EncodedOrder);
 50       //do some logic
 51       if(frame_queue_size) return &frame_queue[0];
 52       return NULL;
 53   }
 54
 55   static mfxU32 GetFrameCost(mfxU16 FrameType, mfxU16 PyramidLayer)
 56   {
 57       UNUSED_PARAM(FrameType);
 58       UNUSED_PARAM(PyramidLayer);
 59       // calculate cost
 60       return 1;
 61   }
 62
 63   static mfxU32 GetMinSize(MyBrcContext *ctx, mfxU32 cost)
 64   {
 65       UNUSED_PARAM(ctx);
 66       UNUSED_PARAM(cost);
 67       // do some logic
 68       return 1;
 69   }
 70
 71   static mfxU32 GetMaxSize(MyBrcContext *ctx, mfxU32 cost)
 72   {
 73       UNUSED_PARAM(ctx);
 74       UNUSED_PARAM(cost);
 75       // do some logic
 76       return 1;
 77   }
 78
 79   static mfxI32 GetInitQP(MyBrcContext *ctx, mfxU32 MinSize, mfxU32 MaxSize, mfxU32 cost)
 80   {
 81       UNUSED_PARAM(ctx);
 82       UNUSED_PARAM(MinSize);
 83       UNUSED_PARAM(MaxSize);
 84       UNUSED_PARAM(cost);
 85       // do some logic
 86       return 1;
 87   }
 88
 89   static mfxU64 GetTime()
 90   {
 91       mfxU64 wallClock = 0xFFFF;
 92       return wallClock;
 93   }
 94
 95   static void UpdateBRCState(mfxU32 CodedFrameSize, MyBrcContext *ctx)
 96   {
 97       UNUSED_PARAM(CodedFrameSize);
 98       UNUSED_PARAM(ctx);
 99       return;
100   }
101
102   static void RemoveFromQueue(MyBrcFrame* frame_queue, mfxU32 frame_queue_size, MyBrcFrame* frame)
103   {
104       UNUSED_PARAM(frame_queue);
105       UNUSED_PARAM(frame_queue_size);
106       UNUSED_PARAM(frame);
107       return;
108   }
109
110   static mfxU64 GetMaxFrameEncodingTime(MyBrcContext *ctx)
111   {
112       UNUSED_PARAM(ctx);
113       return 2;
114   }
115
116   mfxStatus MyBrcInit(mfxHDL pthis, mfxVideoParam* par) {
117      MyBrcContext* ctx = (MyBrcContext*)pthis;
118      mfxI32 QpBdOffset;
119      mfxExtCodingOption2* co2;
120      mfxI32 defaultQP = 4;
121
122      if (!pthis || !par)
123         return MFX_ERR_NULL_PTR;
124
125      if (!IsParametersSupported(par))
126         return MFX_ERR_UNSUPPORTED;
127
128      ctx->frame_queue_max_size = par->AsyncDepth;
129      ctx->frame_queue = (MyBrcFrame*)malloc(sizeof(MyBrcFrame) * ctx->frame_queue_max_size);
130
131      if (!ctx->frame_queue)
132         return MFX_ERR_MEMORY_ALLOC;
133
134      co2 = (mfxExtCodingOption2*)GetExtBuffer(par->ExtParam, par->NumExtParam, MFX_EXTBUFF_CODING_OPTION2);
135      QpBdOffset = (par->mfx.FrameInfo.BitDepthLuma > 8) ? (6 * (par->mfx.FrameInfo.BitDepthLuma - 8)) : 0;
136
137      ctx->max_qp[0] = (co2 && co2->MaxQPI) ? (co2->MaxQPI - QpBdOffset) : defaultQP;
138      ctx->min_qp[0] = (co2 && co2->MinQPI) ? (co2->MinQPI - QpBdOffset) : defaultQP;
139
140      ctx->max_qp[1] = (co2 && co2->MaxQPP) ? (co2->MaxQPP - QpBdOffset) : defaultQP;
141      ctx->min_qp[1] = (co2 && co2->MinQPP) ? (co2->MinQPP - QpBdOffset) : defaultQP;
142
143      ctx->max_qp[2] = (co2 && co2->MaxQPB) ? (co2->MaxQPB - QpBdOffset) : defaultQP;
144      ctx->min_qp[2] = (co2 && co2->MinQPB) ? (co2->MinQPB - QpBdOffset) : defaultQP;
145
146      // skipped initialization of other other BRC parameters
147
148      ctx->frame_queue_size = 0;
149
150      return MFX_ERR_NONE;
151   }
152
153   mfxStatus MyBrcReset(mfxHDL pthis, mfxVideoParam* par) {
154      MyBrcContext* ctx = (MyBrcContext*)pthis;
155
156      if (!pthis || !par)
157         return MFX_ERR_NULL_PTR;
158
159      if (!IsParametersSupported(par))
160         return MFX_ERR_UNSUPPORTED;
161
162      if (!IsResetPossible(ctx, par))
163         return MFX_ERR_INCOMPATIBLE_VIDEO_PARAM;
164
165      // reset here BRC parameters if required
166
167      return MFX_ERR_NONE;
168   }
169
170   mfxStatus MyBrcClose(mfxHDL pthis) {
171      MyBrcContext* ctx = (MyBrcContext*)pthis;
172
173      if (!pthis)
174         return MFX_ERR_NULL_PTR;
175
176      if (ctx->frame_queue) {
177         free(ctx->frame_queue);
178         ctx->frame_queue = NULL;
179         ctx->frame_queue_max_size = 0;
180         ctx->frame_queue_size = 0;
181      }
182
183      return MFX_ERR_NONE;
184   }
185
186   mfxStatus MyBrcGetFrameCtrl(mfxHDL pthis, mfxBRCFrameParam* par, mfxBRCFrameCtrl* ctrl) {
187      MyBrcContext* ctx = (MyBrcContext*)pthis;
188      MyBrcFrame* frame = NULL;
189      mfxU32 cost;
190
191      if (!pthis || !par || !ctrl)
192         return MFX_ERR_NULL_PTR;
193
194      if (par->NumRecode > 0)
195         frame = GetFrame(ctx->frame_queue, ctx->frame_queue_size, par->EncodedOrder);
196      else if (ctx->frame_queue_size < ctx->frame_queue_max_size)
197         frame = &ctx->frame_queue[ctx->frame_queue_size++];
198
199      if (!frame)
200         return MFX_ERR_UNDEFINED_BEHAVIOR;
201
202      if (par->NumRecode == 0) {
203         frame->EncodedOrder = par->EncodedOrder;
204         cost = GetFrameCost(par->FrameType, par->PyramidLayer);
205         frame->MinSize = GetMinSize(ctx, cost);
206         frame->MaxSize = GetMaxSize(ctx, cost);
207         frame->QP = GetInitQP(ctx, frame->MinSize, frame->MaxSize, cost); // from QP/size stat
208         frame->StartTime = GetTime();
209      }
210
211      ctrl->QpY = frame->QP;
212
213      return MFX_ERR_NONE;
214   }
215
216   #define DEFAULT_QP_INC 4
217   #define DEFAULT_QP_DEC 4
218
219   mfxStatus MyBrcUpdate(mfxHDL pthis, mfxBRCFrameParam* par, mfxBRCFrameCtrl* ctrl, mfxBRCFrameStatus* status) {
220      MyBrcContext* ctx = (MyBrcContext*)pthis;
221      MyBrcFrame* frame = NULL;
222      mfxU32 panic = 0;
223
224      if (!pthis || !par || !ctrl || !status)
225         return MFX_ERR_NULL_PTR;
226
227      frame = GetFrame(ctx->frame_queue, ctx->frame_queue_size, par->EncodedOrder);
228      if (!frame)
229         return MFX_ERR_UNDEFINED_BEHAVIOR;
230
231      // update QP/size stat here
232
233      if (   frame->Status == MFX_BRC_PANIC_BIG_FRAME
234        || frame->Status == MFX_BRC_PANIC_SMALL_FRAME)
235         panic = 1;
236
237      if (panic || (par->CodedFrameSize >= frame->MinSize && par->CodedFrameSize <= frame->MaxSize)) {
238         UpdateBRCState(par->CodedFrameSize, ctx);
239         RemoveFromQueue(ctx->frame_queue, ctx->frame_queue_size, frame);
240         ctx->frame_queue_size--;
241         status->BRCStatus = MFX_BRC_OK;
242
243         // Here update Min/MaxSize for all queued frames
244
245         return MFX_ERR_NONE;
246      }
247
248      panic = ((GetTime() - frame->StartTime) >= GetMaxFrameEncodingTime(ctx));
249
250      if (par->CodedFrameSize > frame->MaxSize) {
251         if (panic || (frame->QP >= ctx->max_qp[0])) {
252            frame->Status = MFX_BRC_PANIC_BIG_FRAME;
253         } else {
254            frame->Status = MFX_BRC_BIG_FRAME;
255            frame->QP = DEFAULT_QP_INC;
256         }
257      }
258
259      if (par->CodedFrameSize < frame->MinSize) {
260         if (panic || (frame->QP <= ctx->min_qp[0])) {
261            frame->Status = MFX_BRC_PANIC_SMALL_FRAME;
262            status->MinFrameSize = frame->MinSize;
263         } else {
264            frame->Status = MFX_BRC_SMALL_FRAME;
265            frame->QP = DEFAULT_QP_DEC;
266         }
267      }
268
269      status->BRCStatus = frame->Status;
270
271      return MFX_ERR_NONE;
272   }
273
274   void EncoderInit()
275   {
276        //initialize encoder
277        MyBrcContext brc_ctx;
278        mfxExtBRC ext_brc;
279        mfxExtCodingOption2 co2;
280        mfxExtBuffer* ext_buf[2] = {&co2.Header, &ext_brc.Header};
281        mfxVideoParam vpar;
282
283        memset(&brc_ctx, 0, sizeof(MyBrcContext));
284        memset(&ext_brc, 0, sizeof(mfxExtBRC));
285        memset(&co2, 0, sizeof(mfxExtCodingOption2));
286
287        vpar.ExtParam = ext_buf;
288        vpar.NumExtParam = sizeof(ext_buf) / sizeof(ext_buf[0]);
289
290        co2.Header.BufferId = MFX_EXTBUFF_CODING_OPTION2;
291        co2.Header.BufferSz = sizeof(mfxExtCodingOption2);
292        co2.ExtBRC = MFX_CODINGOPTION_ON;
293
294        ext_brc.Header.BufferId = MFX_EXTBUFF_BRC;
295        ext_brc.Header.BufferSz = sizeof(mfxExtBRC);
296        ext_brc.pthis           = &brc_ctx;
297        ext_brc.Init            = MyBrcInit;
298        ext_brc.Reset           = MyBrcReset;
299        ext_brc.Close           = MyBrcClose;
300        ext_brc.GetFrameCtrl    = MyBrcGetFrameCtrl;
301        ext_brc.Update          = MyBrcUpdate;
302
303        sts = MFXVideoENCODE_Query(session, &vpar, &vpar);
304        if (sts == MFX_ERR_UNSUPPORTED || co2.ExtBRC != MFX_CODINGOPTION_ON)
305            // unsupported case
306            sts = sts;
307        else
308            sts = MFXVideoENCODE_Init(session, &vpar);
309   }

JPEG

The application can use the same encoding procedures for JPEG/motion JPEG encoding, as shown in the following pseudo code:

// encoder initialization
MFXVideoENCODE_Init (...);
// single frame/picture encoding
MFXVideoENCODE_EncodeFrameAsync (...);
MFXVideoCORE_SyncOperation(...);
// close down
MFXVideoENCODE_Close(...);

The application may specify Huffman and quantization tables during encoder initialization by attaching mfxExtJPEGQuantTables and mfxExtJPEGHuffmanTables buffers to the mfxVideoParam structure. If the application does not define tables, then the oneVPL encoder uses tables recommended in ITU-T* Recommendation T.81. If the application does not define a quantization table it must specify the mfxInfoMFX::Quality parameter. In this case, the oneVPL encoder scales the default quantization table according to the specified mfxInfoMFX::Quality parameter value.

The application should properly configure chroma sampling format and color format using the mfxFrameInfo::FourCC and mfxFrameInfo::ChromaFormat fields. For example, to encode a 4:2:2 vertically sampled YCbCr picture, the application should set mfxFrameInfo::FourCC to MFX_FOURCC_YUY2 and mfxFrameInfo::ChromaFormat to MFX_CHROMAFORMAT_YUV422V. To encode a 4:4:4 sampled RGB picture, the application should set mfxFrameInfo::FourCC to MFX_FOURCC_RGB4 and mfxFrameInfo::ChromaFormat to MFX_CHROMAFORMAT_YUV444.

The oneVPL encoder supports different sets of chroma sampling and color formats on different platforms. The application must call the MFXVideoENCODE_Query() function to check if the required color format is supported on a given platform and then initialize the encoder with proper values of mfxFrameInfo::FourCC and mfxFrameInfo::ChromaFormat.

The application should not define the number of scans and number of components. These numbers are derived by the oneVPL encoder from the mfxInfoMFx::Interleaved flag and from chroma type. If interleaved coding is specified, then one scan is encoded that contains all image components. Otherwise, the number of scans is equal to number of components. The encoder uses the following component IDs: “1” for luma (Y), “2” for chroma Cb (U), and “3” for chroma Cr (V).

The application should allocate a buffer that is big enough to hold the encoded picture. A rough upper limit may be calculated using the following equation where Width and Height are width and height of the picture in pixel and BytesPerPx is the number of bytes for one pixel:

BufferSizeInKB = 4 + (Width * Height * BytesPerPx + 1023) / 1024;

The equation equals 1 for a monochrome picture, 1.5 for NV12 and YV12 color formats, 2 for YUY2 color format, and 3 for RGB32 color format (alpha channel is not encoded).

Multi-view Video Encoding

Similar to the decoding and video processing initialization procedures, the application attaches the mfxExtMVCSeqDesc structure to the mfxVideoParam structure for encoding initialization. The mfxExtMVCSeqDesc structure configures the oneVPL MVC encoder to work in three modes:

  • Default dependency mode: The application specifies mfxExtMVCSeqDesc::NumView and all other fields to zero. The oneVPL encoder creates a single operation point with all views (view identifier 0 : NumView-1) as target views. The first view (view identifier 0) is the base view. Other views depend on the base view.

  • Explicit dependency mode: The application specifies mfxExtMVCSeqDesc::NumView and the view dependency array, and sets all other fields to zero. The oneVPL encoder creates a single operation point with all views (view identifier View[0 : NumView-1].ViewId) as target views. The first view (view identifier View[0].ViewId) is the base view. View dependencies are defined as mfxMVCViewDependency structures.

  • Complete mode: The application fully specifies the views and their dependencies. The oneVPL encoder generates a bitstream with corresponding stream structures.

During encoding, the oneVPL encoding function MFXVideoENCODE_EncodeFrameAsync() accumulates input frames until encoding of a picture is possible. The function returns mfxStatus::MFX_ERR_MORE_DATA for more data at input or mfxStatus::MFX_ERR_NONE if it successfully accumulated enough data for encoding a picture. The generated bitstream contains the complete picture (multiple views). The application can change this behavior and instruct the encoder to output each view in a separate bitstream buffer. To do so, the application must turn on the mfxExtCodingOption::ViewOutput flag. In this case, the encoder returns mfxStatus::MFX_ERR_MORE_BITSTREAM if it needs more bitstream buffers at output and mfxStatus::MFX_ERR_NONE when processing of the picture (multiple views) has been finished. It is recommended that the application provide a new input frame each time the oneVPL encoder requests a new bitstream buffer. The application must submit view data for encoding in the order they are described in the mfxExtMVCSeqDesc structure. Particular view data can be submitted for encoding only when all views that it depends upon have already been submitted.

The following pseudo code shows the encoding procedure:

 1mfxExtBuffer *eb;
 2mfxExtMVCSeqDesc  seq_desc;
 3mfxVideoParam init_param;
 4
 5init_param.ExtParam=(mfxExtBuffer **)&eb;
 6init_param.NumExtParam=1;
 7eb=(mfxExtBuffer *)&seq_desc;
 8
 9/* init encoder */
10MFXVideoENCODE_Init(session, &init_param);
11
12/* perform encoding */
13for (;;) {
14    MFXVideoENCODE_EncodeFrameAsync(session, NULL, surface2, bits,
15                                    &syncp);
16    MFXVideoCORE_SyncOperation(session,syncp,INFINITE);
17}
18
19/* close encoder */
20MFXVideoENCODE_Close(session);